SPARROW Floor

Material
Luminaire housing in milled anodised aluminium, and top side in glass. Arm in extruded anodised aluminium. Foot plate, table clamp or grommet (accessory) in anodised and chromed steel.

Installation
Luminaire stand is sold as a separate article number and assembled with chosen accessories (ordered separately). Luminaire stand is assembled on a foot plate, table clamp or grommet.

Connection
2 m transparent halogen-free connecting leads with Plug-in driver which is connected to a socket.

Light source
Incl. LED-light source Lumileds luxeon 3020, colour temperature 3000K. Colour reproduction: CRI 90. Chromaticity tolerance: 3 SDCM. Lifespan: L70 50 000 hrs.

Diffuser
Individual reflector for each individual diode.

Light distribution
Symmetrical distribution of light. Luminaire housing and stand are adjustable, which means that a symmetrical light pattern can be achieved.

Light regulation/control
Light regulation 0-100% and on/off via touchdim on designated surface situated on the outside of the luminaire housing. Programmed light levels retained even after a power cut. Equipped with integrated presence detector (PIR) in the luminiare housing. The sensor has a detection angle of 60° and a detection distance of 2 metres. 2 hours after the last detection, the light will be switched off.
The luminaire meets the requirements of the international standards for interior work lighting, EN 12464-1, with an illuminance value of at least 500 lux on the work surface.

Standard finish
White RAL 9016 or Black RAL9011. Gloss number 20.