Pozzo Power

A recessed luminaire with two light distribution patterns. A separate hidden spotlight module in the centre that can be turned on and off as required, e.g. for illuminating a patient bed and a wide-beam opal diffuser for general lighting. A bevelled outer edge that provides a soft luminance transition to the ceiling.

Installation
Recessed installation in suspended ceilings. Unventilated or ventilated ceilings. Stable assembly springs included. When installing in soft tile ceilings, mounting plates must be used, see accessories. The ballast housing is separate for flexible and quick installation.
Do not cover with insulation. For detailed information, see the installation instructions.

Connection
Connection in separate ballast housing. Quick release terminal block 5×1.5 mm² (x2), onward connection possible. 5×1.5 mm² (x2) when dimming. Can also be supplied with a frame-mounted snap-in connector in the ballast where there is the possibility for a T-splitter. Luminaire body and driver are delivered interconnected.

Design
Luminaire in white (RAL 9016) structured finish. Luminaire housing of enamelled deep drawn aluminium.

Louvre
Opal – opal louvre shutters made from PMMA.

Miscellaneous
All models come with 2 drivers. Separate driver for spot module. Luminaires with Tunable White (2700 – 6500 K) are equipped with the DALI Device type 8 driver. Luminaire with Tunable White in combination with Amber comes with two separate drivers, one 2-channel for spot module/amber.

CLO (Constant Light Output) means that the luminaire provides the same amount of light for the duration of its specified burn time.
The supplied driver must be connected to protective earth.