Pozzo Robust

A recessed luminaire in a Robust IK 10 design. High level of efficiency and light comfort. Bevelled outer edge that provides a soft luminance transition to the ceiling. Front ring fastened with a safety screw to prevent access and disassembly.

Installation
Recessed installation in suspended ceilings. Unventilated or ventilated ceilings Stable mounting system included. When installing in soft tile ceilings, mounting plates must be used, see accessories. The ballast housing is separate for flexible and quick installation.
Do not cover with insulation. For detailed information, see the installation instructions.

Connection
Connection in separate ballast box. Snap-in terminal block 3×1,5 mm² (x2), through-wiring possible. 5×1,5 mm² (x2) when dimming. Can also be supplied with mains cable and earthed plug or chassis mounted snap-in connector.The luminaire housing and driver are connected via a Quick Connection System.

Design
Luminaire in white (RAL 9016) structured finish. Luminaire housing of enamelled deep drawn aluminium. Stable front ring in painted sheet steel in white (RAL 9016) structured finish. The front ring is attached with security screws to prevent access and disassembly.

Louvre
Opal – opal louvre shutters made from impact resistant polycarbonate (PC)

Miscellaneous
Robust luminaire in an IK 10 design. Luminaires with Tunable White (2700 – 6500 K) are equipped with the DALI Device type 8 driver. Luminaires with Tunable White in combination with Amber come with two separate drivers.

CLO (Constant Light Output) means that the luminaire provides the same amount of light for the duration of its specified burn time.

Luminaire body Class III.
The supplied driver must be connected to protective earth.