Fagerhult
Pleiad G4 Wallwasher
- CAD Models available
Overview
- Collection
- Pleiad G4
- Type
- Spotlights
An efficient, asymmetrical downlight for illuminating walls with a light that reaches all the way up to the corner of the ceiling. With several luminous fluxes and reflector options, G4 Wallwasher is also available with Tunable White and RGB/W.
Installation
Recessed mounting in unventilated or ventilated suspended ceilings. Separate driver and installation clip for easy and tool-free installation supplied as standard. An assembly plate must be used when mounting on soft tile ceilings, , see accessories. For detailed information, see the installation instructions.
Connection
Connection in separate driver box. Snap-in terminal block 3×1.5 mmm² (x2), onward connection possible. 5×1.5 mm² (x2) when dimming. Can also be supplied with chassis mounted snap-in connector in the ballast where a T-splitter or mains cable and plug are possible. The luminaire body and driver are interconnected with a snap-in connector.
Design
Luminaire body in cast aluminium and white PBT-plastic. Visible reflector ring in white PBT plastic (RAL 9003).
Reflector
Metallised PBT in bright and matt aluminium. The reflector has a protective coat of scratch-resistant clear lacquer.
Miscellaneous
The luminaire is supplied with dust protection over the light opening. IP 20. Luminaire body Class III. The supplied driver must be connected to the protective earth. Luminaires with Tunable White (2700 – 6500 K) are equipped with driver DALI Device type 8. Luminaires with RGB/W are equipped with driver DALI Device type 6 (4 addresses / luminaire). Also available for DMX on request.
For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation. CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its rated life.”