AllFive LED

A universal luminaire, developed for industrial use with IP 44 to withstand moisture and mechanical stress. AllFive is just as suitable for garages and culverts as laundry rooms and kitchens.

Installation

Surface mounted, cable wire, wire suspension or on a wall. Installation using the seal supplied with the luminaire provides protection classification IP 44. With wall mounting or installation without seals the luminaire is classified IP 40.

Connection

Connects via 230 V, built-in LED driver. Four Ø 19 mm access holes with blanking grommets on top of the luminaire and one Ø 16 mm knock-out in each end. The centrally positioned snap-in terminal block 5×2.5 mm² provides through-wiring. The luminaire is also available with 5×1.5 mm² through-wiring and snap-in terminal blocks at each end (-34).

Design

Body in white enamelled, corrosion resistant aluzinc (RAL 9016). End-caps of ASA plastic.

Louvre

Clear cover of extruded acrylic plastic with prismatic underside and lined sides. Opal diffuser available as an accessory to place in clear cover, not suitable with additional number -515. Article marked with ”UGR < 19 compliance” has an added technical inside the prismatic diffuser.

Dimming

e-Sense BrightSwitch – PIR sensors with lux threshold. Presence control on/off. Absence dimming high/low available on request.
e-Sense Detect – microwave sensors with lux threshold. Presence control on/off via relay or high/low, alternatively high/low/off via DALI.
e-Sense Move – microwave sensors with lux threshold. Presence control high/low/off. All luminaires have master/slave functionality with RF communications.

Miscellaneous

Luminaire 1200 mm has a switch for high/low flow. Always delivered set at low flow and need to be adjusted for high flow.